Air Dancer (Powered by a Leaf Blower!)
This project was sponsored by The Home Depot.
This air dancer project requires a 3D Printer, Laser Cutter, and a sewing machine.
3D Printed Air Diffuser
3D Printed Reducer
Laser Cut Box
Laser Cut Air Dancer
For the 3D printed parts we used Hatchbox PLA, but any filament should work.
The box was cut out of 1/4″ Plywood.
The Air Dancer was cut out of ripstop nylon, which is the same material used to make kits.
It also requires some 6″ Ducting and 4″ ducting to connect the leaf blower.